Alfan MurtadloLet’s say you want to add new unit, and you want to actualize the unit you want; you can go to this setting:
Add New Telemetry Profile
To add the new one, you need to follow this step:
1. Click on New Telemetry Profile.
2. Then you will into this page.
3. You can select the available unit on the Unit dropdown.
4. You can also type your own unit if your preferred isn’t available.
5. Set the Profile Type. Each profile has its own setting.
Conversion
Let’s say you want to make your unit as milliampere (mA) which means you need to divide the Ampere (A) unit with 1.000. To do so, you can follow this step:
1. Select Conversion.
2. Set the Operator.
3. Set the Conversion Value.
4. Click Add Telemetry Profile when done
Range Values
Let’s say you want to set some range for your telemetry, then you need to follow these steps:
1. Select Range Values.
2. Set the Minimum Values and Maximum Values.
3. Click Add Telemetry Profile when done.
Comparison Condition
Let’s say you want to limit a sensor value, use this option to apply a comparison condition, which converts the measurement scale when a specific threshold is reached.
1. Select Comparison Condition.
2. Set the Condition.
3. Then set the Value and the Converted Value.
4. Click Add Telemetry Profile when done.
Edit Telemetry Profile
To make changes to your new telemetry, simply follow these steps:
1. Click on Edit Action.
2. Edit and personalize as you want.
3. Click Update Telemetry when done.
Delete Telemetry Profile
To delete your telemetry profile, you just need to click the Delete icon, then confirm if you want to do the deletion.
