Ever wonder why some BLE beacons can run for months while other die within weeks? The difference often comes down to one factor, the advertising interval.
The advertising interval determines how ofte…
Featured Articles
What is MQTT and How It Works
Before diving deeper into understanding what the usage MQTT in IoT is, let’s look at the history of MQTT itself. In 1999, Andy Stanford-Clark of IBM, and Arlen Nipper (then of Arcom Systems, later C ...
Memaksimalkan Keamanan Gudang Dengan Teknologi IoT
Kehilangan stok dan kerusakan barang di gudang sering terjadi tanpa alasan yang jelas. Mengapa? Karena masih banyak area gudang yang sulit dijangkau pengawasan—tersembunyi di balik rak, gelap, atau ...
What is IoT?
In recent years, these words have become a hot topic. However, this technology was actually invented in the early 1980s, but discussion was not very common—especially in the first 20 years of its cr ...
Encryption in IoT
Encryption in IoT is a preventive measure to battle one of the vulnerabilities faced by IoT infrastructure. Encryption in IoT is a must, so that the data sent and received is safe from irresponsible p ...
Users Management in IoT Stadiums
Whether your goal is to share a personal project with your family or share your device with your technicians, it will be beneficial to understand how Users Management works on IoT Stadium. Our quick o ...
IoT Stadium Guides Blog
Why IoT Device Batteries Drain Fast and How to Fix It
You have installed your Internet of Things (IoT) device in several locations. Everything is running smoothly, but a few weeks later, one of your devices is not giving any reports at all. The culprit? …
Adding a Relay Module to ESP32 via MQTT on IoT Stadium
Do you have an Arduino or ESP32 project that requires remote control of a mains-voltage device—such as an air conditioner or lamp—via MQTT? Here’s the challenge: most household electronics need …
© 2025 IoT Stadium. All rights reserved.