- Number of Sensor : 1
- Type : DHT22
Power Supply : 3.3 – 6V DC
Operating Range :
Humidity : 0-100% RH
Temperature : -40 to 80 °C (-40 to 176 °F)
Accuracy :
Humidity : ±2% RH (Max ±5% RH)
Temperature : <±0.5 °C (41 °F)
Repeatability :
Humidity : ±-1% RH
Temperature : ±0,2°C (35.6 °F)
Number of Sensor : 1
Type : Sharp GP2Y1010AU0F
Power Supply : -0,3 to 7V DC
Operating Temp : -10 to 65 °C (14 to 149 °F)
Storage Temp : -20 to 70 °C (-4 to 158 °F)
Operating Humidity : 95% RH
Wavelength : 870 nm
Sensing Area : 7.6 mm x 6.4 mm (0.3 in x 0.25 in)
Number of Sensor : 1
Type : HC-SR501
Power Supply : 4,5 to 20V DC
Detection Distance : 3 to 7 m (9.84 to 22.87 ft)
Detection Angle : <120 degrees
Delay Time : Adjustable, approximately 5 seconds to 200 seconds
Sensitivity : Adjustable, can be set to repeatable or non-repeatable trigger mode
Operating Temp : -15 to 70 °C (5 to 158 °F)
Storage Temp : -20 to 80 °C (-4 to 176 °F)
Operating Humidity : 5% to 93% RH
Number of Sensor : 1
Type : VT90N2
Voltage Rating : 100V DC
Operating Temp : -40 to 75 °C (-40 to 167 °F)
Power Rating : 80 mW
Power Dissipation : 80 mW
Resistance : 500 kΩ
- Number of LEDs: 3
- Green : Power on
- Blue :
- On : Connect to Wi-Fi or LoRa
- Blink 3x: on AP mode
- Blink 2x: on SmatConfig mode
- Off : Unconnected with Wi-FI or LoRA
- Red :
- On : Alarm triggered
- Blink : Connected with only one communication protocol (Wi-FI or LoRa)
- Off : Alarm not triggered and the connection is secure