-
Number of Sensors : 4
-
Type : Dallas Semiconductor DS18B20 (waterproof version)
-
Temperature Range : -67°F to 257°F (-55°C to +125°C)
-
Accuracy : ±0.5°C (from -10°C to +85°C)
-
Sensor Functions : Monitor Temperature, Log Temperature, Email Alerts, SNMP Traps
-
Humidity Type : Xytronix Model X-DTHS-P sensor
-
Humidity Range : 0-100% RH
-
Accuracy : ±2%
Number of sensor : 1
Type : MC-38 Magnetic Switch
Operating Distance : >15 mm (0.59 in) to <25 mm (0.98 in)
Cable Length : 30.5 cm (12 in) ± 12 mm (0.47 in)
Number of Sensor : 1
Type : HC-SR501
Power Supply : 4,5 to 20V DC
Detection Distance : 3 to 7 m (9.84 to 22.87 ft)
Detection Angle : <120 degrees
Delay Time : Adjustable, approximately 5 seconds to 200 seconds
Sensitivity : Adjustable, can be set to repeatable or non-repeatable trigger mode
Operating Temp : -15 to 70 °C (5 to 158 °F)
Storage Temp : -20 to 80 °C (-4 to 176 °F)
Operating Humidity : 5% to 93% RH
- Number of Ports : 4
- Input Power : VCC, (power from external input), GND
- Output Power : VCC, GND
- Configuration : Normally Open
- Switch :
- On : 1 (short circuit)
- Off : 0 (close cicruit)
- System : Depends on system
- Number of Ports : 4
- Number of LEDs: 4
- Power : Green
- On
- Off
- LORA : Orange
- On : Connect to LoRa
- Off : Unconnected with LoRA
- WIFI : Blue
- On : Connect to Wi-Fi
- Blink 3x: on AP mode (Provisioning)
- Blink 2x: on BLE mode (Provisioning)
- Off : Unconnected with Wi-FI
- Alarm : Red
- On : Alarm triggered
- Off : Alarm not triggered, and the connection is secure
- Power : Green